U. S. Solid 1/8" Nylon Electric Solenoid Valve 12V DC Normally Closed NBR
Compare price from $16.89 ~ $16.95ADVERTISEMENT
Product Details
U. S. Solid Normally Closed Electric Solenoid Valve; 1/8"ports, engineering plastic (Nylon) body, nitrile rubber (NBR) seals, 12 volt DC, for air, water U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a Nylon, engineering plastic body, two-way inlet ...MoreU. S. Solid Normally Closed Electric Solenoid Valve; 1/8"ports, engineering plastic (Nylon) body, nitrile rubber (NBR) seals, 12 volt DC, for air, water U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a Nylon, engineering plastic body, two-way inlet and outlet ports with one-eigth inch (1/8") female threaded (NPT) connections, and nitrile rubber (NBR) seals. The coil uses alternating current and energizes at 12 volts DC; voltage range + or - 10%. 4.8 Watt power rating. Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI. 1/8" (2.5 mm) flow aperture permits a unidirectional flow capacity of 023 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.23 Cv). Operational temperature range is 23 to 176 degrees Fahrenheit; -5 to +80 degrees Celsius. Suitable for outdoor use; not for use underwater. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 21 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. Manufactured in China. Model: USS2-00084. Quality assurance and/or conformity managed in accordance with standards: ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.Less