3/8" Snow Blower Impeller Modification Kit 3-Blade Universal - by Haiouus, for Modifies Snowblower 2-Stage Machine

Compare price from $9.99 ~ $21.95

Compare Buying Options

Sort by Lowest Price	Item price	Delivery
Amazon 3/8" Snow Blower Impeller Modification Kit 3-Blade Universal - by Haiouus, for Modifies Snowblower 2-Stage Machine	$9.99	Delivery date & cost shown at checkout

Grill Parts America 3/8" Snow Blower Impeller Modification Kit 3-Blade Universal - by Haiouus, for Modifies Snowblower 2-Stage Machine	$21.95	Free delivery by Fri, Jan 19 90-day returns

9.99
Amazon
3/8" Snow Blower Impeller Modification Kit 3-Blade Universal - by Haiouus, for Modifies Snowblower 2-Stage Machine
Delivery date & cost shown at checkout
21.95
Grill Parts America
3/8" Snow Blower Impeller Modification Kit 3-Blade Universal - by Haiouus, for Modifies Snowblower 2-Stage Machine
Free delivery by Fri, Jan 19 90-day returns

Product Details

☞Product Includs: 3 X Rubber Paddles 3 X Metal Straps 9 X Bolts 9 X Lock Nuts 3 X Self-Tapping Screws 3/8" Thick Rubber Paddle (2"W X 5"L) - (Trim To Fit As Needed). Made From Styrene Butadiene Rubber (Sbr Rubber) Sbr Rubber With Minimum Tensile Strength Of 725 Psi (5 Mpa),Hard Rubber With A Durometer Of 65-75. Metal Strap With Holes - 1 3/8" W X 3 3/4"L ,1/16" Thick. Bolts (5/16-18 X 1 In. Coarse Thread) W/ 5/16-18 Lock Nuts (Use 1/2" Wrench & Socket) ; Hex Bolts,Hex Lock Nuts Nylon Inser. Self-Tapping Screw (#14 X 1),Sheet Metal Screw, Hex Washer Head Self Drilling. ☞This Kit Is To Reduce The Existing“Gap”Between The Snow Blower'S Impeller Blades And The Impeller Chamber Wall. The Smaller The Gap, The Greater Your Machine'S Operational Efficiency And Snow Throwing Capability Will Be, And The Less Likely That Your Machine Will Clog Up With Snow. This "Gap" Allows Snow And Slush To Slip By The Blades And Build Up Around The Impeller And In The Discharge Chute Clogging It. ☞This Gap Also Decreases The Efficiency Of The Impeller'S Ability To Propel The Snow Up The Chute Resulting In Less Throwing Distance. If You Have A Single-Stage Snow Blower, Or Your Gap Is Less Than 1/4" Or Greater Than 5/8", You Probably Don'T Need Or Can'T Use This Fix. ☞If The Gap Varies Around The Chamber Wall, You Must Install The Rubber To Fit The Spot Where The Gap Is The Smallest, Otherwise, The Rubber Will Fail! The Rubber Paddles Mounted Should Be Installed So They Are Barely Touching. Remember, Any Decrease In The Gap Between The Impeller Blades And The Chamber Wall Will Result In A Significant Improvement In Operational Efficiency And Throwing Distance!